FSAE Prototype redesign

After working on the shortcomings of the initial design , the entire prototype chassis was broken down [ :'( ] and the new design was made reusing the same pipes on 8th May 2010.

The areas extensively worked on were :

1) The front bulkhead
2) The roll hoops

The front bulkhead was extensively modified to make it more compact and to blend it along with the sloping of the  nosecone. An extra support attachment was also added to the main hoop.

In all the rebuilding process was a success and the chassis looked more compact. The few places where we will be working on are the front hoop area and the main hoop area.

The front hoop looked very much raised initially but after cutting down 2 inches , it turned back normal.Discussions were held on tilting the front bulkhead at an angle of around 10 degrees to increase the cockpit area and to assist steering.

The top view of the new chassis.

Inspired Karters in full throttle.

Rishi Bigghe's  macbook with the design.











After successfully building the new chassis the team members are now ready to master their subsystems and come back after the holidays for more 'FSAE adrenaline'.

FSAE .. You just can't get enough of it.

The next update will be on individual subsystems' progress.

Cheers !

The BAJA 2011 team composition

After the success of Inspired Karters in BAJA 2010, we are all set to do it all over again but this time take it to new heights.The BAJA team has registered for the competition and a lot of work has being going on these days ,especially in the transmission area.Coming back to the main topic, here are the Inspired Karters of the BAJA team :


Team Captain :  Rishi Bigghe
Team Vice-Captain : Shubham Dixit

Design:

Head : Kartik Bagga 
Nitin Hiran
Syed Ain Ahmad
Nagamalla Shashank

Suspension :

Head: Rohit Garg
Chandan Agrawal
Ch.Anurag
Vinay Billa

Engine and Transmission : 

Head : Rishi Bigghe
Aviral Sharma
Parth Ved
Shriharsh Rahatgaonkar 

Steering :

Head : Shubham Dixit
Raza Ahmad
Siddharth Raghuraman


Braking :

Head : Kartik Gandhi
Pulkit Malpani
Maulik Agrawal
Gagandeep Singh

Marketing and sponsorship :

Head : Anirudh Singh


 A great team indeed .. with the lessons we have learnt from the past ..the enthusiasm of the present and the uncertainty of the future .. we are going to fly high .. higher than ever before.

Cheers !

The making of the Prototype v 1.0

So this is going to be the first post of this blog... and what a way to start things off..

The prototype v 1.0 was made yesterday night (yeah .. ob night out !) based on the initial design made by Rishi and team.This was done mainly to check the ergonomics of the car and the 'soundness' of the chassis.

The prototype's rods are made of PVC pipes(1 inch dia) and the joints are handled by the universal joining material(the duct tape :P).These materials were chosen as the prototype had to be built in a short time and the cost had to be kept minimal.

The pipes used for making the prototype of BAJA were reused and a few new ones were bought.The dimensions were marked on the floor and the floor of the chassis was made.We divided ourselves into groups and simultaneously the main hoop and the upper plane were being made.The vertical members were added to the floor and the upper plane was attached to it and then the front and main hoops were added. A few more members were added near the bulk head region and the bracing for the front hoop was done. All this was done in flat 90 minutes I guess.




The BAJA car's seat was put in the drivers cockpit and Anirudh finally inaugurated the chassis. It was a great sight.For the first time the entire FSAE team had constructed something together.

Now comes the analysis part.The driver was able to fit in the cockpit comfortably.The front bulkhead portion looked a little big as there was a lot of space after the pedal area.The front hoop area was looking a little congested and there was a discussion on the positioning of the rack and the A arms.Rohit talked about keeping the wheel center close to driver to decrease weight transfer to the rear and to improve maneuverability.

It was great educational experience for the first yearites and the now that we've got some feedback ,the redesigning has started and this is what FSAE is all about..an infinite loop of deign,test and redesign..

PS: Its is Kartik's birthday today and we 'missed' his presence.